Carney All Seasons Blog: Posts Tagged ‘Souderton’

What Makes a Furnace High Efficiency?

Monday, December 19th, 2011

You’ve probably heard about the new lines of high efficiency furnaces being released by popular home heating companies, but what exactly is different about these high efficiency devices from your Chalfont home’s current furnace? Let’s take a closer look at what a high efficiency furnace offers and why it can save you money.

Added Features

A high efficiency furnace uses familiar technology in a new way to reduce the amount of energy lost when combustion takes place. This means:

  • Sealed Combustion – Instead of open combustion which allows heat to escape during and after the combustion process, a high efficiency furnace uses a sealed chamber with carefully measured and fed airflow to burn fuel and produce heat. Exhaust heat can then be recaptured and used to heat air transferred to your air vents.
  • Two Stage Gas Valves – With a two stage gas valve, your furnace can respond to the temperature outside. There isn’t just one “on” switch. The furnace will regulate gas flow based on how much energy is needed to produce heat for your home. So, if there is a sudden burst of cold outside, the furnace will respond accordingly, but for most days when heating needs are low, it will use only the minimum amount of needed gas.
  • Programmable – High efficiency furnaces are now programmable, meaning you can set specific time limits for operation, change thermostat settings digitally and inspect the device through an electronic read out. The level of control given to you by a programmable high efficiency furnace can greatly reduce gas or electricity consumption.

Cost Benefit

The real reason many people are interested in high efficiency furnaces is that they are so much less expensive to operate. Instead of costing hundreds of dollars to run through the winter, they operate the bare minimum needed to heat your home. Using up to 95% of the fuel they consume to produce heat and regulating gas to cut how much is consumed during milder days, these furnaces are built to save you money.

If you have an old furnace that chews through energy like nobody’s business, now might be the time to consider the benefits of a brand new, high efficiency model.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on What Makes a Furnace High Efficiency?

The Hardest HVAC Maintenance: Some Pointers from Sellersville

Monday, November 14th, 2011

Do you hate to work on your own mechanical equipment in your Sellersville home, like furnaces and plumbing fixtures? You aren’t alone. Many people are not cut out to be do-it-yourselfers (DIYers). They prefer to hand off their maintenance and repair chores to qualified professional. That’s not a bad thing. But there are lots of DIYers who prefer to work on their own home repairs – and those are the people who aren’t afraid to take on the most challenging jobs.

If you are looking for good ideas on how to maintain your home’s heating and cooling (HVAC) system beyond the normal filter changeouts, here are some good things to check – things that will help with the overall performance of your HVAC system.

  1. Check the ventilation system. The ventilation carries conditioned air from a main source throughout your home.  It takes a little time and effort to check your ventilation system for things like cracks or leaks around joints, but it is an important maintenance task. You may even find separations between joints or holes caused by nails. A leaky ventilation system could be sending conditioned air into attics, walls, or crawlspaces and making your furnace work extra hard just to keep your living areas warm and comfortable. Take time to visually inspect as much of your ventilation system as possible – usually metal or flex duct – and repair using joint glue, metal filler, or duct tape.
  2. Inspect the insulation. Your heating system works in conjunction with the insulation in your home to provide comfort and warmth while saving you on high utility bills. A home that is poorly insulated or not insulated at all will cause a furnace to work harder and not only send utility bills higher, but increase the possibility of mechanical failure. Replacing or adding insulation in walls and crawlspaces is a relatively easy, yet time-consuming task. You can roll down or tack up fiber insulation or blow in insulation into walls. You can also seal up cracks on your home’s walls, roof, or foundation with a number of different products. Once again, your goal is to make your heating system work less and save you money.
  3. Check the visible components of the furnace. A build-up of dust and dirt can make the moving components of your furnace work even harder, such as the motors, fan belts, contactors, etc. If you live in an area where there is lots of dust and humidity or if your home has several occupants and/or animals, it is particularly important to check your system on a regular basis. This can be done by removing the access panels and taking a vacuum cleaner hose into as many areas as possible. A good, thorough vacuuming should produce immediate results and make your furnace run much more efficiently.

Try these three steps and you may not have to repeat them for another year or so – possibly not ever again while you live in your home.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on The Hardest HVAC Maintenance: Some Pointers from Sellersville

How Often Should I Replace My Furnace Filter?

Wednesday, November 9th, 2011

Just like the filter in your air conditioner, replacing your furnace filter is the key to a healthy and comfortable Willow Grove home. By keeping a good filter replacement schedule, you will reduce wear and tear to the furnace and keep your home warm, while keeping your family healthy and controlling energy costs all winter.

But when does your furnace filter need to be changed? Well, each system is different, but there are some general guidelines and recommendations to follow that can help you keep it all straight and stay on top of your furnace filter situation.

Conventional Wisdom

The long-standing rule of thumb on furnace filters is to change them every month. This is good practice if you are using older fiberglass filters, but for newer, more efficient filters, you should do it a little differently. These should be inspected and cleaned at least once a month, but you may need to replace them that frequently also.

Sometimes it is a little more complicated than these general guidelines, so it pays to be aware of some factors and conditions in your home that may affect how frequently you need to change your filter.

Things to Consider

As mentioned above, the first thing to consider is the efficiency of the filter. Because new filters are so efficient, when they get dirty or clogged with dust and debris, they actually restrict airflow, making your furnace bog down and work harder. So, it is important to stay on top of a monthly inspection and cleaning schedule with these filters.

Also take into account air quality and sources of allergens both inside and outside your home. If you live in an area with a lot of pollutants in the air, you’ll want to replace your filters often to keep those out of your home. If you own a lot of pets, the dander and hair will wind up in your furnace filter and you may have to replace it more often.

Complicated enough for you? It doesn’t have to be. Simplify the whole process by doing the following: check your filter monthly and be prepared to change it that often, clean high-efficiency filters regularly, replace the filter at least every three months and again at the start of heating season.

If you do those things at a minimum, you will be in pretty good shape. If have any questions about furnace maintenance, contact your local contractor.

Continue Reading

Tags: , , , , , , ,
Posted in Heating | Comments Off on How Often Should I Replace My Furnace Filter?

Pros and Cons of Heat Pumps

Wednesday, October 26th, 2011

When deciding on any major purchase in Blue Bell, a critical step is to weigh the pros and cons. This helps you to decide on the best option and reach the best decision for your needs and preferences. You certainly know that already, but it is a step that people sometimes overlook in their excitement to get something new, so it bears mentioning.

Installing a new heating system is a perfect example of a situation in which you would need to weigh pros and cons. There are a lot of options, and not all of them are right for all people. Take heat pumps, for example. They are great devices and serve many people extremely well as home heating solutions, but they are not without their drawbacks. Below are some of the pros and cons of heat pumps to help you decide whether a heat pumps if the way to go for you.

Pros:

  1. Inclusive – A heat pump not only heats your home in the winter but also cools it in the summer, thanks to a reversing valve that changes the flow of the refrigerant. Having one appliance for both heating and cooling can be very convenient.
  2. Energy efficient – Heat pumps are extraordinarily efficient when it comes to energy use. Because they simply move and distribute heat, rather than producing any on their own, they use minimal electricity.
  3. Simple – Operating on the same basic principles as your refrigerator or an air conditioner, heat pumps are relatively simple. More importantly, they simplify your life by putting your heating and cooling solutions in one package and running on electricity, so you don’t need any other fuels on hand.
  4. Inexpensive to operate – In addition to being energy efficient – which lowers your monthly energy bills – many heat pumps are eligible for federal tax credit. You can save a bundle by using a heat pump.

Cons:

  1. May need supplementing in cold climates – In climates where winter temperatures stay below 30 degrees Fahrenheit for a while at a stretch, a heat pump will have trouble keeping up and need to be supplemented.
  2. Don’t work in power outage – Obviously, because they are powered by electricity, a heat pump won’t work in a power outage, unlike some other heating solutions that do not require electricity.

Although the pros clearly outweigh the cons here, the cons are important as well. Carefully consider all these factors and more while deciding whether a heat pump is the solution for you.

Continue Reading

Tags: , , ,
Posted in Heat Pumps | Comments Off on Pros and Cons of Heat Pumps

How to Get My Furnace Ready for Winter

Wednesday, October 19th, 2011

Being cold in the winter is normal – as long as you are outside. But you shouldn’t be cold inside your New Britain home. If that happens, the first place to look to is your furnace, which may not be working correctly. Furnaces are like any other piece of mechanical equipment. They need to be maintained and serviced on a regular basis to ensure they are working at peak efficiency and warming your entire home at your desired comfort level.

The best time to get your furnace ready for winter is not during the cold winter months – it is before the winter season even begins. There are several way to get your furnace ready for winter and let’s explore some of them.

First of all, check and see when you last had your furnace serviced. If it has been over one year ago, you should schedule and maintenance inspection from your local qualified heating and cooling professional. And when you make that appointment, ask about service agreements and getting on a regular maintenance schedule. Most heating and cooling contractors offer service agreement plans which include furnace and air conditioning check-ups on an annual basis.

Okay, so you know who to call for maintenance but what can you do yourself? First of all, give your furnace a little “help” by checking the vents and returns throughout the house. Ensure that there are no obstructions or blockages such as rugs, clothing, furniture, etc. You need to have unobstructed paths for your heated and return air to flow. The more congested the path, the harder your furnace will have to work. And while you’re at it, make sure your vents are open or closed, depending on how much you use your rooms. For example, if you have an extra bedroom that doesn’t need to be heated, closed off the vent or close the damper in the ductwork. The heated air will be diverted to other parts of your home where it is needed.

You can also help the airflow by vacuuming the vent cover or removing it and vacuuming any of the ductwork that you can easily get to. For a more thorough job consider calling a qualified and professional duct cleaning contractor. Many heating and cooling contractors also offer duct cleaning service, too.

Another maintenance function that you can perform is cleaning or replacing the furnace filter. Depending on the size of your home and its air quality (occupants, pets, etc.), you may want to clean or replace your air filter every one to three months. A dirty filter can restrict airflow and can put contaminants like dirt and dust right back into your air system. If you don’t know how to replace your air filter, consult the furnace owner’s manual or go online to learn more. If your furnace uses an electrostatic air filter, it will need to be removed and cleaned, either by using a hose or with soapy water and a hose. Make sure you let it dry before re-installing it.

You may also want to inspect any electrical wires around your furnace to ensure none are broken or frayed. A visual inspection should be good enough.

Once you have done what you can, let your heating and cooling professional take over from there. They are licensed and trained to inspect your furnace and ensure that it is in peak operating condition. And do it today – while everyone else is waiting.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on How to Get My Furnace Ready for Winter

The Technology of Video Pipe Inspection: Some Pointers

Monday, September 26th, 2011

Let’s face it – technology is the answer for everything, from Souderton to Maple Glen. If it’s mechanical, it has been affected by technology. The world of plumbing is no exception. Technology now makes it possible for people to look inside the piping in their home – to get the “inside story” on why a pipe is blocked up or why water is flowing too slowly. A trained expert can use video pipe inspection technology to quickly diagnose a problem in order to find a solution.

So what types of technology are available today? Before we get to that, remember that technology is fluent. By the time you read this blog there may be something new to make this material outdated. The best way to keep up with the latest technology of video pipe inspection is to talk to your local plumbing professionals and check out updates on the Web.

The technology you will see in your home can be viewed live or via digital recording. The camera and its scope can grab a birds-eye view of the pipe without the need to unscrew fittings and elbows and without having to make a mess of things.

Plumbers making a service call who use video inspection will usually show homeowners some live pictures from inside their pipes or use a digital reproduction in their sales presentation. In either case, the camera doesn’t lie and repairs are quickly supported by video evidence.

Here are some of the components involved in the technology of video pipe inspection. First and foremost is the camera itself, which usually will have high definition image display, recording, and playback capabilities. Images can be stored on flash cards for downloading onto other computers or to the Web. The lens of the camera is mounted into the head of the scope, which could be made of fiber optic or fiberglass material. The scope or “snake” comes in a variety of lengths. Images from the camera can viewed on monitors of various sizes in color or black-and-white.

Other options may include audio capabilities for a plumbing professional to record what the camera sees and explain the problems and solutions to homeowners via voiceover technology.

According to one plumber who utilizes this type of technology, video pipe inspection provides “an assessment of pipe’s structural integrity, detection of blockages, breaks or defects, still image/video footage for client use, and first-time mapping or updates.”

If you want to utilize the latest technology to diagnose pluming problems in your home, call your local plumbing professional and ask for a video pipe inspection.

Continue Reading

Tags: , , , , ,
Posted in Plumbing | Comments Off on The Technology of Video Pipe Inspection: Some Pointers