As you get ready for the cold months ahead in Buckingham, it is a good idea to remind yourself of some basic heating maintenance and repair facts. In general, when your heating system stops working, you’ll need to call a professional to come out and take a look. However, before you do that, there are likely a couple of things you can check on your own to ensure that there really is a problem with the system itself.
For instance, if it’s cold in your house and your heat isn’t coming on, check to make sure that the thermostat is set to a high enough temperature that the heating system would be triggered. Particularly if this is the first really cold day of the season, it’s entirely possible that your thermostat was turned down at some point and left there. And if the thermostat isn’t turned up high enough, the heat will never come on.
Also, it’s worth just taking a second to check and make sure that the power switch on the heating system itself is actually in the proper on position. For the most part, there would be no reason for you to turn this off, but it’s always possible it could have happened in any number of ways and it only takes a second to check.
Depending on the type of fuel source your heating system uses, it’s probably a good idea to check to make sure the supply is still available as well. If you use natural gas, check to make sure that the gas line is open, but don’t try to repair it yourself if it seems to be compromised. If you find something like that, be sure to call your gas company right away.
However, if you use oil as a heat source, take a quick peek at the levels in your tank. There’s always the possibility that you used more than you thought you did or that a delivery was missed for some reason and so your heating system simply has no fuel to run on. Similarly, if your heating system runs on electricity, make sure that the fuse wasn’t blown or that it’s not just too loose to provide an adequate power supply.
If you’ve covered all of these basic troubleshooting bases, it may be time to take a closer look at the heating system itself. On just about every type of system there should be some type of reset switch or button. Follow the instructions to press this button and engage the reset process, but be sure to only try this once. If that resetting doesn’t work, it’s time to back off and call in some professional help.