Carney All Seasons Blog: Posts Tagged ‘Blue Bell’

Water Heater Tip: Reduce Energy From Your Hot Water Heater

Monday, November 19th, 2012

Are you looking to lower the energy use for the hot water heater in your Blue Bell, PA home? While your water heater may not be an obvious source of energy waste, there are small improvements you can make that will add up over time. Feel free to call the energy experts at Carney Plumbing Heating & Cooling if you have further questions about how to reduce the energy use of your water heater.

Meanwhile, we’ve put together a short list of things you can do to get started today!

Use Less Hot Water

Conserving water in your home is a green practice that the entire family can help with. Once you get into the habit of conserving water, it will be even easier to think about how much hot water you use. Even if you don’t have Energy Star appliances, you can use cold water instead of hot in many instances. For instance, try using cold water to wash clothes. Not only does this save energy by using less fuel to heat the tank in your water heater, but it will also help your clothes last longer. Take shorter showers, or lower the temperature in the shower while you are bathing.

If you own a tankless water heater, consider installing low flow faucets and plumbing fixtures. Tankless models are highly efficient water heaters, but they are even more efficient when used in tandem with low-flow fixtures. Repair dripping hot water faucets and other small leaks. These add up over time, and if you get them repaired as soon as you notice them, the less hot water will be wasted.

Lower the Water Heater Thermostat

While no one wants an ice cold shower, you also don’t need the shower to be scalding hot. Not only is this dangerous, especially for small children, but it is also a waste of energy. You could save up to 5% in water heating costs if you lower your water heater thermostat just ten degrees. Many manufacturers use the default setting of up to 140°F; however, you don’t need to set your water heater thermostat above 120°F to get an adequate temperature for all the hot water applications in the home. Call one of the Blue Bell plumbers at Carney if you aren’t sure where to locate the thermostat or have questions about the proper temperature settings.

Install a Water Heater “Jacket”

If you own a storage tank water heater, make sure that the tank is insulated for maximum energy savings. You can install a water heater “jacket” that fits your specific water heater tank. Call a plumber if you would like to know whether or not your water heater has enough insulation. One of our plumbers can also provide other tips to help you save water and energy.

Start saving water and lowering your energy costs today! Call the Blue Bell plumbers at Carney Plumbing Heating & Cooling for more advice and tips.

Tags: Abington, Ambler, Bedminster, Blue Bell, Energy Savings, Plumbing, Water Heaters
Posted in Plumbing | Comments Off on Water Heater Tip: Reduce Energy From Your Hot Water Heater

Air Conditioning Tip: Indoor Air Conditioning Components

Monday, July 16th, 2012

Air conditioning in Lansdale is a modern convenience that we can easily take for granted as long as all the parts are working well. In every unit, no matter the size, the basic process is one of extracting heat from the conditioned space and moving it to the outside, leaving cool air in its place.

This process easily divides into indoor and outdoor components.

Air Conditioning 101

Based on the principal of thermal energy which states that heat gravitates toward cooler temperatures, compounds known as refrigerants are moved through a closed loop system, repeatedly contracting and expanding between liquid and gas forms, alternately releasing and absorbing heat along the way. The particular chemicals are selected for their abilities to transform from one state to the other at low temperatures.

While the refrigerant evaporates into a gaseous state within the looped system, it absorbs heat, removing the stale air from the space being conditioned and evacuating it to the outdoors. The warm air is pulled through ducts to meet with the cooling loop.

Ductwork

The cooled air is distributed through ducts or tubing and released into individual spaces. Additional ductwork is required to remove the stale air and pull it back to be reconditioned as it passes over the loop containing the refrigerant. The air is moved in both directions by a blower, usually electric and sized to handle the amount of air no matter the building.

Ductwork is also sized to handle appropriate volumes of air. To maintain efficiency, large trunks distribute along central lines to smaller ones reaching farther out. The return air is usually taken from common areas.

The grates are found in the walls, floors and often as part of the dropped ceiling. When combined with a forced air heating system, the total energy use is much more efficient.

Looped Coils

The refrigerant is enclosed in a loop where it can expand and contract to make its transformation from gas to liquid and back again. To change into a heat-absorbing gas, it travels through the evaporating coils, an intricate series of delicate fins that meets with the ductwork to regenerate the conditioned air.

An exchange valve allows just the right amount of liquid refrigerant into the evaporator coils. If there is too much, the tube is flooded too tightly to allow expansion of the molecules and room to attract the heat. If too little, the process is inefficient.

Cool Maintenance

When set up and maintained on a regular basis, the system functions with little attention and over sight. To schedule a maintenance appointment today, give Carney Plumbing, Heating and Cooling a call!

Tags: Air Conditioning, Air Conditioning Maintenance, Bedminster, Blue Bell, Lansdale, Montgomery County
Posted in Air Conditioning | Comments Off on Air Conditioning Tip: Indoor Air Conditioning Components

What Are Thermostatic Expansion Valves?

Monday, June 11th, 2012

The thermostatic expansion valve, sometimes known as a TEX, TEV or TXV, is a critical piece to influence the efficiency of your Blue Bell air conditioning and refrigeration units. A tiny sensor controlling the evaporating phase of process, the valve can have a big effect.

Cool air is manufactured by a re rapid movement of a refrigerant between liquid and gaseous states. Compound chemicals that are able to do this at a low temperature are compressed and expanded, absorbing and releasing heat at different points along the way. The TEV controls the flow of the refrigerant into the evaporator coils according to the temperatures of the various ingredients.

Cool Air 101

To condition air, the refrigerant, most often freon or another fast acting, low temp compound, evaporates into a gas that runs through a coil and absorbs heat. Passing through a compressor, the freon condenses under pressure back into a liquid again and releases the heat, becoming cool enough to chill a party.

Too much freon in the evaporator tube and the pressure is not low enough to expand to gas and absorb heat, working inefficiently for no gain. Too little freon and the conversion is also ineffective by not reaching the density needed to condense.

There are four types of valves with different benefits for different types of cooling environments. With its ability to adjust minutely to changing conditions, the thermal expansion valve creates the perfect mixture of pressure and freon for more complicated systems.

At the Starting Gate

An interactive device, the valve senses the evaporator pressure and temperature and adjusts the flow of the refrigerant so as to maintain a given “superheat”, the difference between the refrigerant vapor temperature and its saturation temperature. By controlling superheat, the TEV keeps nearly the entire evaporator surface active while not permitting liquid refrigerant to return to the compressor.

Some valves operate on an electrical impulse from sensors that can measure the temperatures. Others are open all the time. The thermostatic expansion valve actually utilizes the pressure between the two sections to open or close itself, regulating flow based on the very same pressure it is designed to moderate.

Like the buildings they comfort, Blue Bell central air conditioning systems are varied and diverse. There are nearly as many thermostatic expansion valves as there are units to receive them. Call Carney Plumbing, Heating & Cooling today if you need any air conditioning service in the Blue Bell area!

Tags: Air Conditioning Information, Air Conditioning Repair, Blue Bell, Lafayette Hill, Lahaska, Langhorne, Montgomery County
Posted in Air Conditioning | Comments Off on What Are Thermostatic Expansion Valves?

Is Your Furnace Not Blowing Enough Air?

Wednesday, March 14th, 2012

Have you ever been in your Jamison house in the winter, listening to the furnace trying to heat the house, but noticed that the whole place is still cold? If you checked the heating vents in this situation, you would probably find that there is not much air flow coming out of them, which is why you are still freezing.

It is entirely possible for the furnace to be burning away, producing hot air, without enough of that warm air ever actually being distributed through your home. So it continues to run and run, resulting in excess wear and tear on the heating system that will probably shorten its productive life, as well as keeping your whole home too chilly.

Why does that happen? There are a several common culprits for insufficient air flow from your Jamison furnace. Below is a list of the most frequent offenders, along with solutions for each:

Cause: Dirty or broken air filter. An air filter that has accumulated too much build up or is damaged will slow down air flow in a hurry.
Solution: Clean or replace the air filter as necessary. This should be part of routine furnace maintenance in order to ensure efficient operation. Refer to the manufacturer’s recommendations to see how often you should check your air filter(s).
Cause: Damaged, corroded, broken or collapsed ductwork. Your ducts are like the road that warm air travels on. If the road is out, then no one can get through. Simple as that.
Solution: Have a professional inspect and repair your ductwork. A routine ductwork check is also part of a professional’s annual maintenance inspection.
Cause: Blower fan not blowing enough. This can be caused by a loose fan belt, or a dirty motor.
Solution: First, clean the blower fan and the area around it. It has to deal with a lot of air, so it naturally becomes dirty over time. If that doesn’t fix it, the fan belt probably needs to be replaced.

There are some other causes of improper furnace air flow, but those are the most common and easiest to detect and repair. If your heat registers are not returning any warm air at all, that is likely a different problem and you should call Carney Plumbing, Heating & Cooling to look at the system right away.

Tags: Blue Bell, Chalfont, Furnace Repair, Heating Repair, Newtown
Posted in Heating | Comments Off on Is Your Furnace Not Blowing Enough Air?

Heating Tip: Simple Steps to Prevent Heat Loss

Wednesday, March 7th, 2012

There are two fundamental ways to make your Fort Washington house warmer. One is to generate heat, which is the job of your furnace or boiler. The second is to keep the warm air in — and thereby keep cold air out — which is the job of your system of insulation.

The idea that the physical structure of a home can be a component of the HVAC system is one that is often overlooked, but when you think about it, it makes sense. The insulation, windows, doors and building materials that comprise your home are designed to keep the place warm against the cold and vice versa.

So, when bolstering your HVAC system to promote efficient heating, it is important to also consider heat loss and how to prevent it. This is a process that can get out of hand if you go overboard, so it is important to prioritize. Let’s look at the top 3 places to start when trying to prevent heat loss.

Doors and Windows: If you have older doors and windows, they could be a source of heat loss in your house, even if they are always closed. Replacing your windows and door with Energy Star rated ones will make sure that you are not losing heat to the outside AND still getting all the heat energy from the sun. Installing storm windows or putting up heavy curtains in winter can also help cut down on your heat loss.

Seal off drafts. If any opening to your house, such as windows and doors, is improperly sealed, improperly installed or if the surrounding construction is deteriorating, you can lose a lot of heat. Check any drafts that you notice that might indicate a problem, and also if your vents and air ducts are leaky.

Start at the top. If you want to go farther in sealing your house up against the cold, it is time to work on the insulation. When installing new insulation, remember that heat rises, so you get the most bang for your buck by starting at the top. If you only have the budget or time to insulate one space, make it the attic. You can work down from there.

These areas should be your top three priorities on your mission to prevent heat loss in your Fort Washington home. If you start here, you will get the best gains with the least effort. If you have any questions about how to keep your house warm this winter, give Carney Plumbing, Heating & Cooling a call today!

Tags: Blue Bell, Energy Saving, Heating, Montgomery County, Newtown, Willow Grove
Posted in Energy Savings, Heating | Comments Off on Heating Tip: Simple Steps to Prevent Heat Loss

Five Ways to Save Heat That You Might Not Have Considered

Friday, February 3rd, 2012

Finding new ways to lower the heating bills for your New Britain home is always a challenge. Maybe you’ve already insulated and sealed every crawlspace and crack, or you might have recently upgraded that old furnace, but there are always other ways to reduce heat loss in the winter.

Here are five ways to conserve heat that you might not have considered.

1. Insulate Recessed Light Fixtures

While recessed light fixtures save space and give you more control over lighting and design, such as task lighting in kitchens, they can be a hidden source of heat loss. Feel around your recessed lighting fixtures to see if there’s cool air or a draft. If you do, they could need more insulation. However, you have to be extremely cautious about what type of insulation you use around electrical wiring and fixtures. Check with the manufacturer, or call an electrician if you aren’t sure what type of insulation to use.

2. Insulate Water Heater Tanks

Part of your heating bill each month goes to heating the water in your home. Whether you have a gas, electric, solar, or hybrid hot water heater, every water heater tank has an R-value that determines how much heat it loses. If you have a low R-value, your tank may need more insulation. Call a professional plumber or check your owner’s manual for the R-value of the model you own, but the general rule is that if the tank is warm when you touch it, you may need to buy a “jacket” for your water heater. These are fairly inexpensive, easy to install, and can be found relatively anywhere you buy insulation.

3. Open Curtains on South End

The southern end of your home will get the most sunlight in the winter. If you have curtains or blinds on your windows or doors, leave them open during the day, and make sure you close them at night. Opening them will help warm up the home naturally during the day, and closing them will help keep the cold air out and warm air in at night.

4. Storm Windows and Doors

Many homeowners know they have the option of upgrading old doors and windows that leak air, but not everyone can afford to upgrade all the doors and windows at once. You can also install storm windows and doors to help reserve heat. Before you start comparing prices, remember to measure, since measurements will affect the cost.

5. Close Fireplace Flue

Whenever your flue is open, you are losing large amounts of heat. Close the damper if the fireplace or chimney is not being used. You can also consider upgrading to a more air tight damper.

You can always call Carney Plumbing, Heating & Cooling whenever you have questions about lowering your heating costs for your New Britain home.

Tags: Blue Bell, Energy Saving, Fort Washington, Heating, New Britain, New Hope
Posted in Energy Savings, Heating | Comments Off on Five Ways to Save Heat That You Might Not Have Considered

What Does a Furnace Fan Limit Switch Do?

Friday, January 6th, 2012

When researching your Plymouth Meeting furnace and potential problems it might have, you’ve probably run across a few references to the fan limit switch. And while you know that it can break in a number of ways, do you know what the switch does and what you should look for when checking your furnace its air handler for problems?

What the Limit Switch Does

To put it very simply, the furnace fan limit switch is a control that tells your furnace’s fan when to turn on and off. So, when the furnace isn’t on, it tells the blower not to operate (and send cold air into your home) and when the furnace is on, it tells the blower to turn on and start circulating the warm air.

While the primary function of the limit switch is to turn the blower fan on and off, it also has a safety role. When the temperature in the air supply plenum gets too hot, the limit switch turns off the furnace boiler to keep there from being any damage from overheating. This is handy if there is a blockage in the air vents or the controls are messed up due to water damage or improper adjustments to the settings.

Looking for Problems

Most of the time, when there is an issue with your furnace turning off or on frequently, the limit switch is one of the first things you will check. Because the switch is electronic and is attached to a thermostat which measures temperature in the air supply plenum, a small problem can result in it not working properly. So, you can easily check it by temporarily bypassing the switch and seeing if your device turns on or off properly.

In many cases, if the limit switch is the problem, you will still need to call a Plymouth Meeting professional for replacement, but you can avoid a lot of headaches related to tracking down the source of the problem. If you suspect a limit switch problem, make sure to call someone immediately, because it does provide an important safety function and because without it your furnace won’t cycle on and off properly.

Tags: Blue Bell, Bucks County, Fort Washington, Heating, Plymouth Meeting
Posted in Heating | Comments Off on What Does a Furnace Fan Limit Switch Do?

Signs that You Have Hard Water in Your Plumbing

Friday, December 9th, 2011

Hard water is fairly common, even in a place like Blue Bell. It is called hard water because of the minerals in it, such as calcium, iron and lime. Depending on how “hard” the water is, it’s usually perfectly healthy, but can cause some other problems throughout the home.

Hard water can negatively affect the durability of household appliances like dishwashers and washing machines, as well as pipes and fixtures throughout the home. How do you know if you have hard water? Here are some common signs and symptoms to be on the lookout for:

A white, scaly, filmy residue left behind on plumbing fixtures. In particular, you may notice these on showerheads, on stainless fixtures like the basin of your kitchen sink, on your silverware or in the coffee pot.
Clothes that are not getting as clean as they should in the laundry. This is because hard water is less effective at washing away dirt. Likewise, you may notice soap scum residue in your tub or shower.
Little or no lather from shampoo or soap while showering.
A reddish tinge to hair over time. This is due to iron in the water that can temporarily change hair color in the shower.
Water takes a long time to heat, or heating costs that are higher than usual. This is because hard water requires more heat than water with fewer minerals in it.
A foul odor emanating from your water.

If you notice any of these signs, or a combination of them, you may have hard water. There are certain things you can do to control the effects of hard water, such as using a commercial mineral remover to dissolve deposits left on showerheads and other fixtures. Vinegar also works well.

However, the best thing to do is to treat hard water so that it does not damage your plumbing system. A licensed plumber can help you do this by adding water softener to your water supply, among other treatments. These are things that need to be done on an ongoing basis, but will help extend the life of your expensive appliances and plumbing system.

Tags: Blue Bell, Langhorne, Plumbing Maintenance, Telford, Water Softeners, Water Treatment
Posted in Plumbing | Comments Off on Signs that You Have Hard Water in Your Plumbing

Pros and Cons of Heat Pumps

Wednesday, October 26th, 2011

When deciding on any major purchase in Blue Bell, a critical step is to weigh the pros and cons. This helps you to decide on the best option and reach the best decision for your needs and preferences. You certainly know that already, but it is a step that people sometimes overlook in their excitement to get something new, so it bears mentioning.

Installing a new heating system is a perfect example of a situation in which you would need to weigh pros and cons. There are a lot of options, and not all of them are right for all people. Take heat pumps, for example. They are great devices and serve many people extremely well as home heating solutions, but they are not without their drawbacks. Below are some of the pros and cons of heat pumps to help you decide whether a heat pumps if the way to go for you.

Pros:

Inclusive – A heat pump not only heats your home in the winter but also cools it in the summer, thanks to a reversing valve that changes the flow of the refrigerant. Having one appliance for both heating and cooling can be very convenient.
Energy efficient – Heat pumps are extraordinarily efficient when it comes to energy use. Because they simply move and distribute heat, rather than producing any on their own, they use minimal electricity.
Simple – Operating on the same basic principles as your refrigerator or an air conditioner, heat pumps are relatively simple. More importantly, they simplify your life by putting your heating and cooling solutions in one package and running on electricity, so you don’t need any other fuels on hand.
Inexpensive to operate – In addition to being energy efficient – which lowers your monthly energy bills – many heat pumps are eligible for federal tax credit. You can save a bundle by using a heat pump.

Cons:

May need supplementing in cold climates – In climates where winter temperatures stay below 30 degrees Fahrenheit for a while at a stretch, a heat pump will have trouble keeping up and need to be supplemented.
Don’t work in power outage – Obviously, because they are powered by electricity, a heat pump won’t work in a power outage, unlike some other heating solutions that do not require electricity.

Although the pros clearly outweigh the cons here, the cons are important as well. Carefully consider all these factors and more while deciding whether a heat pump is the solution for you.

Tags: Blue Bell, Heat Pump Installation, Souderton, Willow Grove
Posted in Heat Pumps | Comments Off on Pros and Cons of Heat Pumps

Warning Signs of a Broken Furnace

Monday, October 10th, 2011

How do you know when your furnace is “on the fritz?” There are warning signs of a broken furnace and some are recognizable – but not all. A broken furnace not only deprives your Blue Bell home of heat and comfort, it also can be deadly, too.

Let’s look at some of the unrecognizable warning signs.

Each year, hundreds of people die and many more are injured from the most common household poison: carbon monoxide. This colorless and odorless poisonous gas comes from several sources and the furnace is the most common source of all; more precisely a broken or malfunctioning furnace. Carbon monoxide is a result of incomplete combustion of a fossil fuel, which is when a fuel does not burn correctly or completely. In a furnace, carbon monoxide gas comes from a poorly operating burner or a cracked heat exchanger. A properly tuned and maintained furnace greatly reduces the risk of carbon monoxide poisoning.

Since carbon monoxide gas is colorless and odorless, it can go undetected. It can make people sleepy and create flu-like symptoms. Sometimes a person may fall asleep and never wake up. But there are warning signs. Drowsiness, vomiting, or flu-like symptoms are a warning sign. Regularly scheduled maintenance of your furnace by a qualified heating and cooling professional and installation of carbon monoxide detectors can reduce the risk of falling ill to carbon monoxide gas.

Another “undetectable” warning sign is a higher energy bill. Sometimes you can’t detect a problem right away because, like carbon monoxide, there may be no obvious signs. Higher utility bills can be a sure sign of a furnace that is working too hard and running more than usual. This may be a result of clogged or dirty air vents, or dirty filters. If your monthly bills are higher than those of the previous year, it may not just be because gas prices are higher.

There are other warning signs of a broken furnace, too. The most obvious is the failure of your furnace to bring your home up to the desired thermostat settings or to maintain an even temperature. Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. This can be because of a poor blower or a clogged furnace filter. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.

A broken or cracked gas line can emit odors and can cause a furnace to malfunction, too.

Don’t take a chance of losing heat and comfort this winter. At the first possible warning sign, call your local heating and professional for a heating system tune-up.

Tags: Blue Bell, Bucks County, Furnace Repair, Heating Repair, Jamison, Plymouth Meeting
Posted in Heating | Comments Off on Warning Signs of a Broken Furnace