Carney All Seasons Blog: Posts Tagged ‘Bucks County’

Quick Tips From Perkasie: How to Save Money on Air Conditioning

Friday, August 26th, 2011

You’ve probably heard once or twice that the cost of running your air conditioner is more than that of any other single electrical device in your Perkasie house. That means you’re spending hundreds and possibly even thousands of dollars each and every year to stay cool. It’s well worth the investment as the risk of not having air conditioning is much too high, but there must be ways to cut the costs, right? With careful attention to how your AC operates and when you use, there are some things you can do to slash those costs. Here are a few of the easiest:

  • SEER Matters – What is this magical acronym you hear so much? SEER refers to how many BTUs your air conditioner can produce with a single watt of electricity. A low SEER device therefore uses a LOT more electricity to produce the same volume of cooling as a high SEER device. Since current devices offer SEER of 13 or higher (some are up to 20+), just about any upgrade will save you money relatively quickly if your current air conditioner has a rating of 8 or lower.
  • Program Your AC – If you have a single point analog thermostat, you’re wasting a LOT of electricity. You’re either paying to cool your house while it’s empty or you’re coming home to a roasting hot living space. Purchase a programmable unit and set the system to 85 degrees when you’re not home. With timers in most digital units, you can tell it when you’ll be home so that you walk into a cool, comfortable space without having to keep it cool all day long.
  • Use the Landscape to Your Advantage – Instead of relying solely on your air conditioner to keep the house cool in the summer, plant some trees and shrubs around the house to block the sunlight. Simply adding some shade to your property can directly reduce how much heat your home absorbs throughout the day and reduce how much your AC unit needs to work to keep you cool.
  • Ventilate Your Roof – A good third of the heat in your home is absorbed directly through the roof. To keep this heat from affecting the rest of your home, install a roof fan that ventilates the excess energy and keeps the attic at a steady temperature. Less heat up top means less cooling needed down low.

A good air conditioning system is effective no matter what the temperature does, so it’s easy to forget how big your bill will soon be. To avoid an overblown bill, keep an eye on your cooling and follow these simple tips to cut back on use. To get more energy saving tips, talk to your HVAC contractor.

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning | Comments Off on Quick Tips From Perkasie: How to Save Money on Air Conditioning

Shower Valves and Fittings

Monday, July 25th, 2011

Your shower is the place you go to get clean. But it is also much more than that. You want to be able to enjoy a comfortable showering experience at all times, and for that you need to have the right shower valves and fittings. There are a lot of factors to consider when you are picking out your new shower setup, so it is a good idea to do some research ahead of time to find out what features are really important to you and which you can do without.

First of all, you will need to pick out the type of shower head that you want. There are wall-mounted, ceiling-mounted and hand-held varieties available, so you should think about where you like the water to be coming from and how much flexibility you want to have in that. Some people definitely prefer hand-held shower heads, but for others it is simply a wasted feature.

When you go to buy a shower head, it is also important to have a budget range firmly in your mind. There are so many features available on some of the top of the line models that it can be very tempting to go all out. Be sure that you really consider how likely you are to make use of all of those features before you go and spend the money on them.

The number of controls that your shower has is another item that you will have to consider. The types of controls you need will depend to a certain extent on the water pressure situation in your house and the availability of hot and cold water. For instance, if your shower is susceptible to losing cold or hot water when someone turns it on elsewhere, you will want a shower head that can compensate for that. If that is not an issue for you, however, there is no reason to spend the money for that particular feature.

While you certainly have many feature-based decisions to make when it comes to picking out your new shower valves and fixtures, do not forget to consider aesthetics as well. The look of your new shower matters too and there are so many different fixture styles and finishes that you should have no problem finding one that suits your sense of style.

Continue Reading

Tags: , , , ,
Posted in Plumbing | Comments Off on Shower Valves and Fittings

How Hard Is Your Water?

Wednesday, July 20th, 2011

The hardness or softness of water varies considerably from one part of the country to another. What we really mean when we talk about hardness is how much calcium and magnesium carbonates are present in the water. The more of these minerals there are, the harder your water will be. While the fact that your water is harder does not mean that it is unsafe, it is good to know what you are dealing with.

There are several ways to find out how hard or soft your water is. You may simply be able to call your local municipality and get the results of the tests they perform. You can also purchase a water hardness test kit pretty easily and some water softener services even perform free hardness testing on mailed-in samples.

Water that is too hard can cause problems for washing machines because it interferes with the chemical functioning of many detergents. And water that is too hard will leave deposits behind on fixtures, sinks, tubs and anything else it comes into contact with. Over time, these deposits can clog up pipes or make their openings smaller, effectively reducing water pressure.

Deposits are also good at clogging up shower and faucet fixtures and they can even build up in your washing machine which will cause some real damage down the line. Using hard water for cooking can create some unwanted complications as well.

Fortunately it is relatively easy to eliminate hard water problems. There are many companies that offer a variety of water softening services. There are water softeners that can be attached to your home water source to treat the water as it comes in and remove any excess chemicals that the water has. These water softeners are an excellent option when you are struggling with very hard water.

Of course, these water softeners can also wear out and become clogged with buildup over time, so you will want to look for a water softening service company that provides full service replacement and repair programs as well.

Continue Reading

Tags: , , ,
Posted in Plumbing | Comments Off on How Hard Is Your Water?

Quick Tips on Toilets

Monday, July 11th, 2011

Quite simply, everyone needs to have a working toilet in their home. Of course, when we do, we tend to take it for granted. Most people really do not know much about how their toilets work and how much water they use, and acquiring that information can be beneficial to you for several reasons. Toilet tips can help you save money, catch problems early and generally get the most out of your toilet.

Water-saving devices are always useful on toilets. Even if you did not buy a water-saver toilet to begin with, you can convert your regular toilet into one by installing a toilet cycle diverter. These great gadgets actually direct some of the water from each flush back into the tank rather than allowing it to run into the toilet bowl itself.

What this does is allow the tank to fill up faster. Less water goes down with each flush and less water is needed to fill up the tank. These devices are relatively easy to install yourself and they can save you a ton in the long run. In fact, the average toilet cycle diverter can conserve up to a gallon of water per flush.

You will also benefit from learning about how your toilet works because it can enable you to catch problems early when they are easy to correct. You may or may not be able to do the corrective work yourself, but at least you can call out a plumber earlier rather than later.

Fixing toilet problems early hopefully means that you will not have to go without a toilet for very long, if at all. And the repairs that you need should be relatively minor and inexpensive. When toilet issues are allowed to persist, they can turn into a much bigger plumbing problem and cause a great deal of inconvenience to you and your family.

One of the most common toilet problems is leaks. A leaky toilet can have all kinds of symptoms, but the bottom line is that it is probably costing you money on your water bill each month. Also, leaks will only get bigger as time goes on, so you will be much better off if you fix them early. Phantom flushing and continuous running are both signs that your toilet is leaking, and the earlier you do something about it, the better off you will be.

Continue Reading

Tags: , , , ,
Posted in Plumbing | Comments Off on Quick Tips on Toilets

Where Are My Shut Off Valves?

Wednesday, July 6th, 2011

Whenever you want to do some home repairs on your plumbing, whether it is to change a leaky faucet or fix knocking pipes, you need to shut off the main water supply. But, most home owners do not know where their main shutoff valves are, especially if they have just moved in or are renting a home that is unfamiliar to them. To help, here are some common places you can look for shutoff valves in your home.

  • Water Meter – The Water Meter, which you can usually find in your basement or just outside your home, will have a shutoff valve attached directly to it. Usually there will be two shutoff valves – one on each side of the meter (supply and home). To effectively shut off your water supply, turn the valve located before the meter.
  • Toilet Supply – Sometimes you do not need to cut off the main water supply to your entire house. It can be disruptive and the people in your home may not appreciate not having drinking water or a shower while you are working on the plumbing. So, when working on the toilet, always look for the toilet water valve located behind the tank. Sometimes this valve will be on the floor – other times it will be located on the wall just behind the tank.
  • Finding Wily Supplies – Sometimes the water supply may not be located where you would expect. It might be behind appliances or access panels or above your head somewhere. Most of the time, the water supply will still be in the basement, so start there and look carefully for the root of the pipes. Since most of the pipes in your home will originate at the supply line, you can usually trace them back to a single source.

If you still cannot find your main water supply line and shutoff valve, that does not mean it is hidden in the floor somewhere or outside. Sometimes, the supply lines are just in odd places, either because of strange construction or poor renovations by a past owner. If this is the case, get a second pair of eyes to help you hunt or as a last ditch option, call a plumber who will be able to more easily follow the lines back to their source. Nine times out of ten, you should be able to find and handle a main water supply on your own. But never rule out calling for a professional’s help if things get more complicated than anticipated.

Continue Reading

Tags: , , , ,
Posted in Plumbing | Comments Off on Where Are My Shut Off Valves?

Whole House Fans vs. Attic Fans

Friday, July 1st, 2011

Air temperature in your home is a big issue in the summer. The cost of maintaining your air conditioner as it runs nonstop for hours at a time can be very high – as much as $4,000 for a single year of cooling. That’s why a lot of families turn to fan solutions to reduce how much they spend on their AC units each year.

How Fans Work

A fan draws in outdoor air to your home. That outdoor air will cool your home when the outside temperature is cooler than the indoor temperature. If the weather outside gets much warmer than 80°F, you will probably still need to use your air conditioner at least a little, but if it’s in the 70°F-80°F range, the temperature inside can be maintained simply by blowing cooler outdoor air into your home.

A whole house fan solves this problem by pumping fresh air into your home through the ductwork you already have in place. When the temperature outside is low enough, you’ll enjoy a much steadier, more comfortable level of cooling and save a lot of money.

However, for those that don’t want to install a completely new system for their entire house, attic fans offer a good chunk of savings as well.

Why Attic Fans Work

The idea behind an attic fan is simple. During the summer, all the heat in your home rises. Even with your air conditioning working at full capacity, heat will build up in the attic, especially if you don’t use that space and therefore don’t have any cooling ducts up there.

In some cases, attic temperatures can rise to 140°F or higher, which then raises the temperature of the rest of your home and forces your AC unit to work that much harder.

An attic fan is good because it takes the air from outside, almost assuredly cooler than 120°F and cycles it into your attic to keep the temperature lower. That simple fan can reduce indoor air temperature by as much as 40°F or 50°F and significantly reduce your air conditioner’s work load.

Which is Better?

Neither of these is better than the other. If you have low cooling costs and want to keep your attic from adding to them, an attic fan is perfect. However, if you want to cut into your cooling costs for all but the warmest months of the summer, a whole house fan may be the right option.

Continue Reading

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off on Whole House Fans vs. Attic Fans

What Is a Flapper Valve?

Monday, June 27th, 2011

Your toilet is not an overly complicated piece of equipment. But in order to work properly, it does require that all of its parts are in the right place and in good shape. Even if something small on your toilet is out of place, it can cause problems like constant dripping or running, improper flushing force or a sudden refilling of the bowl when no one has flushed the toilet.

These problems can sound serious, but many of them are quite easy to address if you know where to look. With most toilets, that place is the flapper valve. The flapper valve is a relatively small rubber plug that fits over an opening at the bottom of your toilet tank. When you press the handle to flush your toilet, the flapper valve lifts up and allows all of the water from the tank to go rushing into the bowl.

The force of this water pushes everything out of the bowl through the drain at the bottom, clearing the bowl and refilling it with fresh water all at once. As long as the flapper valve is able to maintain a tight seal, this process will go along smoothly without a hitch. But sometimes these valves become dirty or simply wear out.

When that happens, water can begin to leak down from the tank into the bowl on an almost constant basis. Depending on the severity of the leak, this may just cause the toilet to run constantly. Or it can even cause periodic “phantom flushes” were the toilet clears the bowl without anyone pressing the handle.

Phantom flushes occur because too much water has seeped down from the tank into the bowl. When the volume in the toilet bowl reaches a certain level, the water in the bowl is forced out, resulting in a flush. This wastes water and can also be pretty startling if you are not expecting it. Fortunately, though, you can usually fix this problem easily enough.

To do this, check your flapper valve to make sure it is keeping a tight seal with the bottom of the tank when not in use. If it is not, you may only need to clean it off to restore the integrity of the seal. In more serious situations, however, you may need to replace the flapper valve entirely. This is not difficult or expensive and can save you a lot of water in the long run.

Continue Reading

Tags: , , ,
Posted in Plumbing | Comments Off on What Is a Flapper Valve?

Types of Drinking Water Filters

Wednesday, June 22nd, 2011

There are not many things more important than making sure that your home drinking water supply is safe and free of contaminants. All kinds of things can appear in your drinking water, and it is helpful to know exactly what types of contaminants are prevalent in your area so that you can make the best decision about what type of water filters to buy.

Some water filters work well at removing certain types of contaminants but not others. However, there are some good water filters that can get rid of almost all contaminants on their own. One such type is a distiller. Water distillers operate by heating the water coming into your home until it turns into steam. When water evaporates like this, it leaves behind anything it was carrying with it when it was in liquid form. The steam rises and moves into another chamber, and when it condenses back into liquid form again, the contaminants are no longer present.

Another type of water filter that removes the majority of contaminants is a reverse osmosis filter. These are excellent for removing things like asbestos, minerals, metals, salts and nitrates. For best results, however, you will want to purchase a system that incorporates some type of carbon filter as well. Carbon filters, placed either before or after the osmosis filtering system, are better at removing things like pesticides and radon. The combination of these two water treatment types into one filter system makes the solution more complete.

If you do not think you have a serious contamination problem but just want to get rid of bad tastes or smells in your water, activated carbon filters are a good and economical choice. However, you will want to make sure that you know exactly what contaminants the filter you purchase is designed to remove, as not all carbon filters are equally as effective against certain types of contaminants.

The most important thing to do before you go out and purchase a water filtration system, however, is to determine what exactly you are trying to remove from your water. The types of contaminants found in your water will vary a great deal depending on where you live and what types of pipes you have in your home, and that will directly affect the type of water filter that is right for you.

Continue Reading

Tags: , , ,
Posted in Plumbing | Comments Off on Types of Drinking Water Filters

Maintenance: Cleaning Your Conditioner Coil Will Save You Headaches Later

Friday, June 17th, 2011

You have plenty of things to clean all over your house. But do you really have to clean your air conditioner too? Well, if you want it to keep working well, you do. In fact, cleaning the coil of your air conditioner is a quick and easy process, especially if you do it on a regular basis, and it can save you a great deal of frustration later on.

Like any machine, your air conditioner needs a tune up from time to time in order to continue to function properly. While a lot of this is taken care of if you have an annual maintenance service performed by a professional, your air conditioning coil will benefit greatly by being cleaned more often than that.

In fact, during your annual maintenance visit, your air conditioning technician can easily demonstrate for you how to get to the coil and clean it. This is a relatively easy task that you can carry out every month or so when your system is in use to help ensure optimal health and functioning for your system.

Of course, your air conditioning system will still run whether you clean the coils on a regular basis or not. For now, that is. Allowing more and more debris to build up on the coil, however, can have a big impact on the overall energy efficiency of your unit. An air conditioner with a dirty coil will have to work harder to keep your house cool, and that will be reflected by an increase in energy consumption.

Also, an air conditioner with a dirty coil that is having to work harder to keep your house cool will wear out more quickly than one that is working properly without added impediments. The added wear and tear that this causes to various other parts within your air conditioner can cause them to malfunction and need to be replaced sooner than they should.

This means more costly repairs, even if they are minor ones. It also means that your entire air conditioning system will probably not last as long as it may have with proper care. You will have to replace it sooner, adding even more to the cost of having and running the equipment.

Cleaning your air conditioner coil regularly is a simple and effective way of helping to keep the entire system running smoothly and efficiently for many years to come.

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on Maintenance: Cleaning Your Conditioner Coil Will Save You Headaches Later

How Much Will a High Efficiency Air Conditioner Save You?

Wednesday, June 15th, 2011

When it comes to your air conditioning system, the energy efficiency rating really does matter. While you may be paying a bit more for products with higher energy efficiency ratings to begin with, you will certainly save a significant amount on your monthly cooling bills in the years to come.

Before you can evaluate your options in terms of energy efficient air conditioners, however, you will need to know how their efficiency is represented. Most air conditioners come with what is called a seasonal energy efficiency rating (SEER). A higher SEER means a more energy efficient model, and likely a higher price tag as well.

But how much more energy efficient is a SEER 10 air conditioning unit as opposed to a SEER 11? Well, the truth is that it is about 7% more efficient. However, a SEER 14 will be 23% more efficient than a SEER 10, but only 5% more efficient than a SEER 13 model.

While all of these numbers can help give you some context in which to evaluate the various air conditioners out there, they can only go so far. Turning these percentages into dollars is what you really have to do when you are trying to figure out what your monthly or yearly savings will be.

So to give you a bit of perspective, imagine that your annual cooling costs come to around $480 with your current SEER 10 air conditioning system. If you choose to upgrade to a SEER 13, you will save somewhere in the neighborhood of $110. But if you opt for the SEER 14 instead, you will gain an annual savings of closer to $140 compared to your current bill.

Of course, the SEER of a particular air conditioner is not the only thing that will cause the price of the unit to rise, nor is it the only thing that can cause your monthly cooling costs to rise. Air conditioners also need to be matched to the size of the space they will be asked to keep cool.

If the unit you have is too small to effectively cool the area in question, you are likely paying more than necessary in terms of cooling costs for less than ideal results. Similarly, if your unit is too big, you will be paying too much no matter how high a SEER rating it has.

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on How Much Will a High Efficiency Air Conditioner Save You?