Carney All Seasons Blog: Posts Tagged ‘Furnace Maintenance’

The Benefits of a Furnace Tune-Up

Monday, September 16th, 2019

We’re getting close to the heating season. As we shut off our air conditioners one by one, the heaters will begin to turn on—except for the ones that haven’t been maintained properly. That’s right, if you’ve kept up with our blogs during this cooling season, it’s not just air conditioners that could benefit from yearly maintenance, but furnaces as well!

Homeowners like to think of their furnaces like campfires. As long as they keep throwing fuel in the fire, they’ll burn just the same, right? But a furnace is more complicated than that. Without the right tune-up or repairs, a furnace can become more inefficient, have costly problems, and eventually turn into a safety hazard for a family and home.

Why take the risk? Contact your nearest professional for heating repair in Doylestown, PA. If you’re still unconvinced, then read on!

Continue Reading

Tags: , , ,
Posted in Heating | Comments Off on The Benefits of a Furnace Tune-Up

3 Ways to Make Sure Your Furnace is Short-Lived

Monday, February 19th, 2018

FurnaceThere are right and wrong ways to take care of your furnace if you want to last as long as possible. Most of the time, we talk about all the things that you should be doing to keep your furnace in top condition as long as you can. Today, though, we’d like to cover some of the things you should do if you want to waste your system’s life and replace it as early as possible. Let’s begin.

Continue Reading

Tags: , , ,
Posted in Heating | Comments Off on 3 Ways to Make Sure Your Furnace is Short-Lived

Be Sure to Schedule Furnace Maintenance Annually

Monday, February 1st, 2016

It can be quite expensive to keep a furnace in proper condition, especially if it develops a serious issue. In an effort to save money on furnace upkeep, most homeowners wait to call for repairs until a problem presents itself. No need to call for professional services unless they’re absolutely necessary, after all. The problem with this method is that it can, and often does, backfire completely. Going without regular preventive furnace maintenance is likely to create more problems, and cost you more money. Let’s take a look at the benefits of annual furnace maintenance.

Continue Reading

Tags: ,
Posted in Heating | Comments Off on Be Sure to Schedule Furnace Maintenance Annually

Benefits of Heating Maintenance for Your Furnace

Monday, October 1st, 2012

Your furnace is like any other piece of equipment in your Langhorne home in terms of what it needs to continue to function at a high level – namely, routine professional maintenance. Even if your furnace is relatively new, it’s never too early to start planning to keep it in good working condition for years to come. Routine heating maintenance is the best way to ensure your furnace will always work when you need it to.

Better Energy Efficiency

One of the most immediate benefits of regular furnace maintenance is the boost you’ll see in your system’s energy efficiency as reflected in lower energy bills going forward. Even the newest, most efficient furnace will lose a measure of its energy efficiency every year. While this drop might not be noticeable at first, it will quickly add up to create higher heating costs for you. But a simple tuneup every year from a Langhorne heating technician can almost completely eliminate this loss in efficiency.

Fewer Repairs

A regular checkup also allows an experienced technician to go through your entire heating system to find any parts that need to be replaced and other issues that could cause problems later on down the line. Addressing these small issues early makes it less likely you’ll need emergency repairs in the middle of winter when your heating system suddenly shuts off. And that saves you both money and aggravation.

Avoid Premature Replacement

Keeping up with regular furnace maintenance will also extend the life of your system, making your initial investment go farther and allowing you to postpone replacement. And that’s always a good thing for your budget as well as for your peace of mind.

With so many benefits stemming from routine maintenance for your heating system, there really is no reason not to get it done. It’s actually quite a quick and inexpensive process, and you’ll be able to rest easy knowing that you did everything you could to make sure your family is warm and comfortable all winter long.
To schedule a heating maintenance visit in Langhorne or the surrounding area, give Carney Plumbing, Heating and Cooling a call!

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on Benefits of Heating Maintenance for Your Furnace

What is a Gas Furnace Draft Hood?

Monday, December 5th, 2011

As any Maple Glen heating contractor knows, a draft hood is a necessary part of any gas burning appliance. For a gas furnace in particular it ensures steady air flow to the burners to avoid flares or the pilot light being put out by fluctuation in temperature and air flow.

What the Draft Hood Does

The draft will change in the chimney as exhaust vents towards it – especially when going from cold air to hot. A draft hood is placed above the upper most part of the gas furnace to draw air into the chimney and makes it possible to draw more or less air through the chimney as necessary to create a constant flow.

This makes it possible for the burner to enjoy consistent air flow without any wind gusts or sudden temperature spikes or drops. Hot air, if not put through a draft hood would create a strong air flow through the burners.

A draft hood cools the air as it is released by the burners from 500 degrees F to between 300 degrees F and 350 degrees F. The cooling needs to be carefully calibrated to avoid condensation build up in the chimney however – a problem that occurs when the temperature gets too low.

Maintaining Pressure

The draft hood is a part of a larger system designed to maintain air flow to the chimney. For every cubic foot of gas burned, the furnace needs to have 15 cubic feet of air for combustion and another 15 cubic feet of air for dilution. A draft hood and the rest of the ventilation system make it possible to put a furnace that has many thousands of BTUs in the basement of your home and still supply it with enough air to burn gas and dilute the exhaust before it enters the chimney.

For all of these reasons, if you see your pilot light flickering irregularly, notice a backflow of exhaust or a burning smell in your furnace room, it’s important to call a professional heating contractor who can inspect and repair the problem before it becomes any worse. Not only can gas burner exhaust contain high levels of carbon monoxide, it can be bad for the device and the chimney if it doesn’t vent properly.

Continue Reading

Tags: , , , ,
Posted in Heating | Comments Off on What is a Gas Furnace Draft Hood?

Make Your Heating System More Energy Efficient

Wednesday, November 16th, 2011

Efficiency is what you want when it comes to heating your Abington home. You want a furnace that provides the greatest degree of accurate indoor comfort while at the same time operating at peak efficiency to reduce energy usage and lower utility bills. That’s seems like a lot to ask of a simple mechanical system but you should expect it out of the furnace in your basement, attic, or mechanical room.

It is especially important today as energy costs have steadily increased, including electricity, natural and propane gas, and oil. The best way to combat rising prices is to have a furnace that uses less energy. It is a simple statement but one that bears repeating: higher efficiency equals lower operating costs.

Here are some ways to make your heating system more energy efficient:

  1. Clean or replace furnace filters on a regular basis. A dirty or clogged filter will make your furnace work harder and become much less energy efficient. Monthly or quarterly cleaning or replacements are easy to do and will result greater operating efficiencies.
  2. Inspect your home’s ventilation system for accumulation of dirt, dust, or debris. Have you recently added new carpeting? Do your pets shed? Is there a large number of people living in your home? If you answered yes to any of these questions you may need to inspect your ventilation system.
  3. Remove obstructions from around vents and grilles. You need a clean path for air to flow into and out of rooms. Restricted airflow makes your furnace work harder and become less energy efficient.
  4. Consider an upgrade to a two-speed or variable speed furnace. Most older furnaces operated on one speed, which cycled on and off and consumed a lot of energy. Today’s furnaces operate at lower speeds, consuming less energy and often remaining on to keep a steady airflow and prevent constant on and off cycling. These newer furnaces are much more energy efficient and cost less to operate.
  5. Adhere to a regular schedule of planned furnace maintenance. If you don’t clean and inspect your furnace on a regular basis, schedule service calls with a local qualified heating contractor. Your contractor will likely have a service agreement plan to fit your budget, which allows for annual inspections, priority emergency service calls, and discounts on parts and services.

Besides saving on energy costs, your efficient furnace will leave a smaller “carbon footprint.” Your efficient furnace will exhaust less carbon dioxide into the atmosphere and maintain a more “green” profile. And being ecologically friendly can be just as important as saving money.

You can be assured that an energy efficient heating system will keep more money in your pocket this fall and winter.

Continue Reading

Tags: , , , , , ,
Posted in Heating | Comments Off on Make Your Heating System More Energy Efficient

How Often Should I Replace My Furnace Filter?

Wednesday, November 9th, 2011

Just like the filter in your air conditioner, replacing your furnace filter is the key to a healthy and comfortable Willow Grove home. By keeping a good filter replacement schedule, you will reduce wear and tear to the furnace and keep your home warm, while keeping your family healthy and controlling energy costs all winter.

But when does your furnace filter need to be changed? Well, each system is different, but there are some general guidelines and recommendations to follow that can help you keep it all straight and stay on top of your furnace filter situation.

Conventional Wisdom

The long-standing rule of thumb on furnace filters is to change them every month. This is good practice if you are using older fiberglass filters, but for newer, more efficient filters, you should do it a little differently. These should be inspected and cleaned at least once a month, but you may need to replace them that frequently also.

Sometimes it is a little more complicated than these general guidelines, so it pays to be aware of some factors and conditions in your home that may affect how frequently you need to change your filter.

Things to Consider

As mentioned above, the first thing to consider is the efficiency of the filter. Because new filters are so efficient, when they get dirty or clogged with dust and debris, they actually restrict airflow, making your furnace bog down and work harder. So, it is important to stay on top of a monthly inspection and cleaning schedule with these filters.

Also take into account air quality and sources of allergens both inside and outside your home. If you live in an area with a lot of pollutants in the air, you’ll want to replace your filters often to keep those out of your home. If you own a lot of pets, the dander and hair will wind up in your furnace filter and you may have to replace it more often.

Complicated enough for you? It doesn’t have to be. Simplify the whole process by doing the following: check your filter monthly and be prepared to change it that often, clean high-efficiency filters regularly, replace the filter at least every three months and again at the start of heating season.

If you do those things at a minimum, you will be in pretty good shape. If have any questions about furnace maintenance, contact your local contractor.

Continue Reading

Tags: , , , , , , ,
Posted in Heating | Comments Off on How Often Should I Replace My Furnace Filter?

How to Get My Furnace Ready for Winter

Wednesday, October 19th, 2011

Being cold in the winter is normal – as long as you are outside. But you shouldn’t be cold inside your New Britain home. If that happens, the first place to look to is your furnace, which may not be working correctly. Furnaces are like any other piece of mechanical equipment. They need to be maintained and serviced on a regular basis to ensure they are working at peak efficiency and warming your entire home at your desired comfort level.

The best time to get your furnace ready for winter is not during the cold winter months – it is before the winter season even begins. There are several way to get your furnace ready for winter and let’s explore some of them.

First of all, check and see when you last had your furnace serviced. If it has been over one year ago, you should schedule and maintenance inspection from your local qualified heating and cooling professional. And when you make that appointment, ask about service agreements and getting on a regular maintenance schedule. Most heating and cooling contractors offer service agreement plans which include furnace and air conditioning check-ups on an annual basis.

Okay, so you know who to call for maintenance but what can you do yourself? First of all, give your furnace a little “help” by checking the vents and returns throughout the house. Ensure that there are no obstructions or blockages such as rugs, clothing, furniture, etc. You need to have unobstructed paths for your heated and return air to flow. The more congested the path, the harder your furnace will have to work. And while you’re at it, make sure your vents are open or closed, depending on how much you use your rooms. For example, if you have an extra bedroom that doesn’t need to be heated, closed off the vent or close the damper in the ductwork. The heated air will be diverted to other parts of your home where it is needed.

You can also help the airflow by vacuuming the vent cover or removing it and vacuuming any of the ductwork that you can easily get to. For a more thorough job consider calling a qualified and professional duct cleaning contractor. Many heating and cooling contractors also offer duct cleaning service, too.

Another maintenance function that you can perform is cleaning or replacing the furnace filter. Depending on the size of your home and its air quality (occupants, pets, etc.), you may want to clean or replace your air filter every one to three months. A dirty filter can restrict airflow and can put contaminants like dirt and dust right back into your air system. If you don’t know how to replace your air filter, consult the furnace owner’s manual or go online to learn more. If your furnace uses an electrostatic air filter, it will need to be removed and cleaned, either by using a hose or with soapy water and a hose. Make sure you let it dry before re-installing it.

You may also want to inspect any electrical wires around your furnace to ensure none are broken or frayed. A visual inspection should be good enough.

Once you have done what you can, let your heating and cooling professional take over from there. They are licensed and trained to inspect your furnace and ensure that it is in peak operating condition. And do it today – while everyone else is waiting.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on How to Get My Furnace Ready for Winter

Safety and Your Furnace

Friday, October 14th, 2011

There are many advantages to a safely operating furnace in your Telford home. The most important are the safety and comfort of a home’s occupants and the cost of running the furnace.  There are several things you can do to ensure the safe operation of your furnace. There are some things you can do to ensure that your furnace runs safely.

Here is a checklist of ideas:

  • Clean or change furnace filters on a regular basis. Replace disposable filters and clean permanent filters using water or cleaning solutions. Your owner’s manual or a qualified heating contractor can suggest a regular maintenance schedule.
  • Check the exhaust vent from the furnace. Clear obstructions such as leaves, clothing, or animal nests from the vent pipe or chimney. Keep roof exhaust vents clear of snow. If there is a faulty exhaust system (like a blocked flue), of if there are cracks and leaks in the pipes or improper adjustment of the burner, or if there is lower air pressure indoors than outside, the furnace can create serious indoor air pollution.
  • A clear air intake is important too, since furnaces need fresh air to “breath” and complete the fuel burning cycle. Again, check for debris, snow, or animal nests in intake pipes.
  • If you have an older gas furnace, you may want to install a supplementary induced-draft fan that reduces the possibility of backdrafting. Some furnaces have automatic shutoff devices that turn off the furnace if it begins to backdraft.
  • Check internal components such as the blower motor and vacuum any dirt. Check belts and pulleys for excessive wear. You should consult your owner’s manual for any suggested maintenance tips on internal working components.
  • You may also want to check the pilot light to see if it is working and if it producing an even, blue flame. If the flame is uneven, it may be a sign of incomplete gas combustion, which can result in the creation of dangerous carbon monoxide gas.
  • Ensure that your thermostat is operating correctly by raising or lowering the temperature settings to make sure the furnace cycles on and off.
  • Install and maintain battery or hard-wired smoke and carbon monoxide detectors.

Externally vented natural gas furnaces, when properly designed and installed, will operate safely for years. But if you detect a problem, use the most common solution – contact a qualified heating professional to check out your furnace.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on Safety and Your Furnace