Carney All Seasons Blog: Posts Tagged ‘Montgomery County’

Happy Thanksgiving!

Thursday, November 24th, 2011

Happy Thanksgiving! We are very thankful for all of our customers; you really make what we do worthwhile. We hope you all have a great holiday and enjoy a delicious Thanksgiving feast! And if you are looking for some dessert ideas, here is a recipe for pumpkin pie from allrecipes.com that will make today a little sweeter:

Mrs. Sigg’s Fresh Pumpkin Pie

“A mixture of fresh pumpkin puree, brown sugar, spices, evaporated milk and eggs is poured into a prepared pie crust and baked. ”

INGREDIENTS:

  • 1 sugar pumpkin
  • 1 recipe pastry for a 9 inch single crust pie
  • 2 eggs
  • 1 cup packed light brown sugar
  • 1 tablespoon all-purpose flour
  • 1/2 teaspoon salt
  • 2 1/2 teaspoons pumpkin pie spice
  • 1 (12 fluid ounce) can evaporated milk

DIRECTIONS:

  1. Cut pumpkin in half and remove seeds. Place cut side down on a cookie sheet lined with lightly oiled aluminum foil. Bake at 325 degrees F (165 degrees C) for 30 to 40 minutes, or until the flesh is tender when poked with a fork. Cool until just warm. Scrape the pumpkin flesh from the peel. Either mash, or puree in small batches in a blender. Increase oven temperature to 450 degrees F (230 degrees C.)
  2. In a large bowl, slightly beat eggs. Add brown sugar, flour, salt, 2 cups of the pumpkin puree, pumpkin pie spice, and evaporated milk. Stir well after each addition.
  3. Pour mixture into the unbaked pastry shell. Place a strip of aluminum foil around the edge of the crust to prevent over browning.
  4. Bake 10 minutes at 450 degrees F (230 degrees C), then reduce the oven temperature to 350 degrees F (175 degrees C). Bake an additional 40 to 50 minutes, or until a toothpick inserted near the center comes out clean. Remove the strip of foil about 20 minutes before the pie is done so that the edge of the crust will be a light golden brown. Cool pie, and refrigerate overnight for best flavor.

For more details, click here.

Continue Reading

Tags: , , ,
Posted in Holiday | Comments Off on Happy Thanksgiving!

Make Your Heating System More Energy Efficient

Wednesday, November 16th, 2011

Efficiency is what you want when it comes to heating your Abington home. You want a furnace that provides the greatest degree of accurate indoor comfort while at the same time operating at peak efficiency to reduce energy usage and lower utility bills. That’s seems like a lot to ask of a simple mechanical system but you should expect it out of the furnace in your basement, attic, or mechanical room.

It is especially important today as energy costs have steadily increased, including electricity, natural and propane gas, and oil. The best way to combat rising prices is to have a furnace that uses less energy. It is a simple statement but one that bears repeating: higher efficiency equals lower operating costs.

Here are some ways to make your heating system more energy efficient:

  1. Clean or replace furnace filters on a regular basis. A dirty or clogged filter will make your furnace work harder and become much less energy efficient. Monthly or quarterly cleaning or replacements are easy to do and will result greater operating efficiencies.
  2. Inspect your home’s ventilation system for accumulation of dirt, dust, or debris. Have you recently added new carpeting? Do your pets shed? Is there a large number of people living in your home? If you answered yes to any of these questions you may need to inspect your ventilation system.
  3. Remove obstructions from around vents and grilles. You need a clean path for air to flow into and out of rooms. Restricted airflow makes your furnace work harder and become less energy efficient.
  4. Consider an upgrade to a two-speed or variable speed furnace. Most older furnaces operated on one speed, which cycled on and off and consumed a lot of energy. Today’s furnaces operate at lower speeds, consuming less energy and often remaining on to keep a steady airflow and prevent constant on and off cycling. These newer furnaces are much more energy efficient and cost less to operate.
  5. Adhere to a regular schedule of planned furnace maintenance. If you don’t clean and inspect your furnace on a regular basis, schedule service calls with a local qualified heating contractor. Your contractor will likely have a service agreement plan to fit your budget, which allows for annual inspections, priority emergency service calls, and discounts on parts and services.

Besides saving on energy costs, your efficient furnace will leave a smaller “carbon footprint.” Your efficient furnace will exhaust less carbon dioxide into the atmosphere and maintain a more “green” profile. And being ecologically friendly can be just as important as saving money.

You can be assured that an energy efficient heating system will keep more money in your pocket this fall and winter.

Continue Reading

Tags: , , , , , ,
Posted in Heating | Comments Off on Make Your Heating System More Energy Efficient

It’s Time for Fall Maintenance (and Happy Halloween Weekend!)

Friday, October 28th, 2011

Everyone at Carney Plumbing, Heating & Cooling wishes you a Happy Halloween weekend! We hope you have a great time dressing up and eating lots of candy! And after Halloween we all know it starts to get pretty cold, so it is time to start thinking about fall maintenance for your HVAC system.

When it comes to heating equipment maintenance and repairs, it does not pay to procrastinate. The longer you put off the maintenance, the higher the probability that your heating system will break down or your heating and cooling contractor will be unable to make an emergency repair when you need it. That’s why fall is the best time of the year to have maintenance and repair procedures performed.

Consider this: when do most people call a heating and cooling contractor? The answer: when they need a repair. The call could come in the middle of the night when a furnace stops working or during a family party on a weekend – both times when it is hard to find someone to do the repair work. Has this happened to you? If so, there are ways you could have prevented this from happening – and could have saved from cold nights and embarrassing situations with house guests.

You can avoid this aggravation and extra expense by scheduling fall maintenance for your heating system. Fall is often the “slow season” for heating and cooling professionals and many schedule their routine service and maintenance appointments during this time. Contractors expect to be busy during the peak winter months and prefer to spread out the workload as evenly as possible.

During fall maintenance, your heating equipment will be switched on and inspected. That may sound routine but by running your heating system early, you may be spared the expense of repairing your system when it fails to operate or run smoothly during the cold months. If there is a problem, it is better to fix it ahead of time.

There is no guarantee that a furnace that is tuned up in the fall will last throughout the winter without needing service. But a little preventive maintenance ahead of time will save a lot of heartache – and dollars – when a real emergency comes up.

Continue Reading

Tags: , , , , , ,
Posted in Heating | Comments Off on It’s Time for Fall Maintenance (and Happy Halloween Weekend!)

Unclogging a Floor Drain: A Tip From Buckingham

Wednesday, September 28th, 2011

It is never fun to wander down into the basement of your Buckingham home only to find that your floor drain has backed up. This is not a situation that will take care of itself and you want to get it under control as quickly as possible. While there are certainly plenty of things you can do to try and unclog a floor drain on your own, there are quite a few potentially complicating factors to consider as well.

First of all, you should make sure that no one in the house turns on any running water for anything until the drain has been unclogged. The floor drain in your basement is usually the last stop on the line for all of the water used in your house, and so any running water anywhere above will only cause more water to back up in the basement. Of course, if you cannot use any running water anywhere else in your house, it is even more imperative that you are able to unclog the floor drain quickly.

If you happen to have a snake on hand, this may be the best option to try first. However, it can be a bit difficult to get the snake to make the sharp turn typical of these types of drains not long after the pipe descends below the floor. That is not to say that it cannot be done, but you should be aware that you need to make sure the snake turns the corner before it will be useful to you at all.

If you do not have a snake of your own, you may still be able to take care of the blockage without calling in a professional plumber. But first you have to find it. Depending on the layout of your drainage system, this may be easier said than done. You can also make a pretty big mess if you open up various sections of pipe looking for the blockage, so be aware and make sure you have something in place to catch the runoff and debris that may come out of the pipes when you open them.

You may also run into trouble if the blockage is actually outside of your house in the larger sewer line that runs to the street. Unclogging a drain with this type of problem is generally a job for a professional and there is very little you will be able to do on your own.

Continue Reading

Tags: , , , ,
Posted in Plumbing | Comments Off on Unclogging a Floor Drain: A Tip From Buckingham

The Technology of Video Pipe Inspection: Some Pointers

Monday, September 26th, 2011

Let’s face it – technology is the answer for everything, from Souderton to Maple Glen. If it’s mechanical, it has been affected by technology. The world of plumbing is no exception. Technology now makes it possible for people to look inside the piping in their home – to get the “inside story” on why a pipe is blocked up or why water is flowing too slowly. A trained expert can use video pipe inspection technology to quickly diagnose a problem in order to find a solution.

So what types of technology are available today? Before we get to that, remember that technology is fluent. By the time you read this blog there may be something new to make this material outdated. The best way to keep up with the latest technology of video pipe inspection is to talk to your local plumbing professionals and check out updates on the Web.

The technology you will see in your home can be viewed live or via digital recording. The camera and its scope can grab a birds-eye view of the pipe without the need to unscrew fittings and elbows and without having to make a mess of things.

Plumbers making a service call who use video inspection will usually show homeowners some live pictures from inside their pipes or use a digital reproduction in their sales presentation. In either case, the camera doesn’t lie and repairs are quickly supported by video evidence.

Here are some of the components involved in the technology of video pipe inspection. First and foremost is the camera itself, which usually will have high definition image display, recording, and playback capabilities. Images can be stored on flash cards for downloading onto other computers or to the Web. The lens of the camera is mounted into the head of the scope, which could be made of fiber optic or fiberglass material. The scope or “snake” comes in a variety of lengths. Images from the camera can viewed on monitors of various sizes in color or black-and-white.

Other options may include audio capabilities for a plumbing professional to record what the camera sees and explain the problems and solutions to homeowners via voiceover technology.

According to one plumber who utilizes this type of technology, video pipe inspection provides “an assessment of pipe’s structural integrity, detection of blockages, breaks or defects, still image/video footage for client use, and first-time mapping or updates.”

If you want to utilize the latest technology to diagnose pluming problems in your home, call your local plumbing professional and ask for a video pipe inspection.

Continue Reading

Tags: , , , , ,
Posted in Plumbing | Comments Off on The Technology of Video Pipe Inspection: Some Pointers

Top 4 Upgrades For Your HVAC System: A Guide From Ambler

Wednesday, September 7th, 2011

Your HVAC system is a trusted part of your Ambler home’s comfort system. Without it you would be cold in the winter, hot in the summer, and breathing in contaminant laden air year round. So, it’s important that you install the best systems and subsystems available for your HVAC system. Here are some options to keep in mind when looking for ways to get the most from your heating and cooling.

  • Humidity Control – Don’t rely on your air conditioner to remove humidity in the summer. A dehumidifier is more energy efficient and reduces stress on your air conditioning system when the humidity gets high. In the winter, humidification allows your home to hold more heat, effectively increasing the efficiency of your heating system.
  • Air Filtration – Every air conditioning system and furnace comes with some form of air filtration, but is it enough? Standard filters are effective, but they are not always comprehensive. A good HEPA quality filter for your air handler and duct system will severely reduce the number of contaminants in your air supply and ensure that you and your family feel much better year round.
  • Ductwork Upgrades – If your ductwork is old, battered or starting to show its years, an upgrade may be in order. If nothing else, having your ductwork cleaned on a regular basis removes excess mold, dusty, pollen, debris and other pollutants that can affect your health and the quality of the air you breathe. Schedule annual cleanings of your ductwork and a biannual inspection to check for cracks and leaks.
  • Air Quality Controls – Beyond air filtration, you can upgrade your air handler’s ability to remove pollutants with a dedicated air cleaner and UV lights. These systems are installed in your air handler and/or ductwork to remove advanced pollutants like bacteria and mold and remove smaller particles including smoke, gas, and exhaust. Which system you need will depend on the level of contaminants in your home, so make sure you check with a contractor before choosing anything.

These upgrades are a great way to get more out of your HVAC system – in terms of both comfort and safety. Discuss your options with a contractor today to learn more.

Continue Reading

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off on Top 4 Upgrades For Your HVAC System: A Guide From Ambler

What Does the EPA Do for Indoor Air Quality?

Wednesday, August 24th, 2011

There are a number of agencies in the United States dedicated to protecting the health and wellbeing of citizens. What does that mean for you in Gwynedd? It means many of the rules and regulations related to indoor air quality are directly overseen by the EPA and the US government. For a better idea of how this impacts your currently lifestyle, here’s a quick look at what the EPA does.

Formation

The Environmental Protection Agency was formed in 1970 by Richard Nixon and the US Congress to oversee the regulation and oversight of air, water, land and hazardous waste. In short, the EPA works to keep our environment clean and safe.

The EPA and Homeowners

While much of what the EPA does relates to corporate pollution, regulations for manufacturing and consumer products, and development of safe methods of production for things like oil, food and water, the EPA has a big hand in ensuring your home stays safe.

Specifically, the EPA started and oversees the Energy Star program to help consumers purchase appliances and HVAC systems that use the least possible energy. Additionally, the EPA oversees the measurements and minimum requirements for home insulation and ventilation. This has as direct impact on indoor air quality.

Current EPA regulations are based on the ASHRAE Standards for low rise buildings and has been revised in the last two decades to ensure proper ventilation and insulation to reduce energy waste and maintain clean, fresh air.

The clean air act has a big impact on how homes are ventilated and maintained and the EPA does a lot of public service work to educate the public on ways to stay safe, including a recent campaign to get your home tested for radon – a potentially life threatening gas that can exist in any home, regardless of age.

Getting to Know the EPA

If you have an indoor air quality or suspect there may be issues in your home, one of the best resources on the Internet is the EPA’s indoor air quality website. It contains laws and regulations that impact your home (if you plan on remodeling or adding on to your home) and dozens of resources for testing and understanding the levels of pollutants in your home.

Continue Reading

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off on What Does the EPA Do for Indoor Air Quality?

Is Geothermal Right for My Home?

Friday, August 12th, 2011

Geothermal heating is a great alternative to other types of home heating systems in Lansdale. It is safe and efficient, costs very little to operate and makes use of a great renewable resource right below our feet. But is it right for you? Well, geothermal heating may be the right choice for many people, but there are many things to take into account before you can determine whether or not it is the best choice for your home.

The first important thing to understand when you are trying to decide whether or not to go with geothermal heating is how one of these systems actually works. A geothermal system heats your home by extracting heat from the ground and then transferring that heat into your indoor air. This happens when liquid, usually water or antifreeze, passes through a loop of pipes installed several feet below the ground.

The liquid absorbs heat from the ground, which in the winter is always warmer than the air, and carries is back up to an air handler inside your home where that heat is allowed to disperse into the air. Once the air is heated, the air handler blows the air through a system of ducts throughout your house, providing a constant stream of heated air to all areas of your home. The liquid, on the other hand, simply cycles back through the ground loop to pick up more heat and repeat the same cycle over again.

Because a geothermal heating system does not actually generate heat, it requires very little energy to operate. This means that it is both very cheap for you to run and environmentally friendly. But since installing a geothermal heating system involves putting pipes in underground, it can be pretty expensive initially. However, as long as the amount you save every month on your heating costs is enough to offset the high initial price of installation, it is worth it to put down the money up front.

Another alternative, of course, is a more traditional air source heat pump. These are much cheaper to install and nearly as cheap to run. However, air source heat pumps are not as efficient when the air temperature gets below freezing as a geothermal system can be. If you live in an area with harsh winters, the geothermal heat pump is a better option than an air source unit.

Continue Reading

Tags: , , , , , ,
Posted in Geothermal | Comments Off on Is Geothermal Right for My Home?

Scald Free Showers and Bathtubs: Scald Prevention Methods

Friday, July 22nd, 2011

One of the worst things that can happen to you in a shower is when a sudden blast of scalding hot water strikes you unexpectedly. This is a problem for many people and usually happens when someone turns on the cold water at another tap in the house. When that occurs, the cold water that you were using to regulate the temperature in your shower becomes temporarily unavailable and the hot water takes over.

This usually does not last long, and even if it does, you will likely jump out of the way quickly. But for the moment you are underneath that scalding hot water, some serious damage can be done, particularly to older people or young children whose skin is not as thick as that of an average adult. Also, in trying to get out of the way of the hot water in a slippery bathtub, many people have accidentally fallen and injured themselves more seriously.

So what can be done about these sudden and unexpected blasts of hot water? Well, recent developments in shower and bathtub technology have made it possible for scald free shower and bathtub fixtures to reach the market. These products are designed to maintain a consistent temperature in your shower no matter what type of water or how much is being used elsewhere in the house.

These scald free showers can compensate for the dip in cold water pressure that occurs when someone flushes a toilet in another bathroom or turns on the water in the kitchen. This is accomplished by the addition of a diaphragm that can immediately adjust to any variations in either hot or cold water pressure. With this technology in place, you will never need to worry about being scalded in the shower again.

Of course, these scald free shower heads and bathtub fixtures can cost a bit more than their conventional counterparts. But they are well worth it, especially if scalding water is a problem in your shower on a regular basis. You need to be able to keep yourself and your family safe in the shower and scald free showers are the best way to do that.

Continue Reading

Tags: , ,
Posted in Plumbing | Comments Off on Scald Free Showers and Bathtubs: Scald Prevention Methods

How a Water Softener Works

Monday, July 18th, 2011

You use water for many things. It is necessary for bathing, cooking, washing clothes and for drinking. But the water we use in our homes is not pure. It has plenty of other minerals and additives suspended inside. While some of these, like fluoride, are intentionally added to the water supplies in certain areas, some others get in by chance.

Aside from actual pollutants, the additives you may be the most concerned about finding in your water are calcium and magnesium. These minerals are picked up by water as it moves through the ground, and the more of them that get into your home water supply, the harder that water will be.

The term hard water is used to describe water with high levels of calcium and magnesium present. These minerals are not actually dangerous to us, but they can cause all sorts of problems for your indoor plumbing and other household systems. For instance, hard water will leave deposits of these minerals on the insides of pipes and on sinks, faucets and bathtubs.

Residue will also build up in appliances like coffee makers, dish washers and washing machines. Over time these buildups can become a real problem and you may have to pay for costly repairs or need to replace large appliances.

In order to avoid these types of complications, your best bet is to have a water softener installed. These systems can be connected directly to your home water source and they are able to remove excess calcium and magnesium from the water before it ever reaches any of your indoor plumbing or appliances.

Water softeners generally remove these minerals by attracting the positively charged calcium and magnesium particles with a tank full of negatively charged polystyrene particles. In this system, the calcium and magnesium are replaced by sodium ions as they move through the water softener, thereby maintaining the overall balanced composition of the water. Once the water has passed through and the calcium and magnesium have been left behind, the water softener will flush them out and prepare to absorb another wave of hard water minerals.

Continue Reading

Tags: , , , ,
Posted in Plumbing | Comments Off on How a Water Softener Works